@article { author = {zia, majid and fazli, ali and soltanpor, mahdi}, title = {Finite Element Analysis of Formability Improvement of Aluminum Alloy AA5182-O in Warm Electrohydraulic Forming Process}, journal = {Aerospace Mechanics}, volume = {15}, number = {2}, pages = {91-102}, year = {2019}, publisher = {Imam Hussein University}, issn = {2645-5323}, eissn = {2980-8103}, doi = {}, abstract = {In this paper, a novel high speed forming process called warm electrohydraulic forming (WEHF) process is introduced. In this new forming process, the blank is heated before the forming process and then formed using the Electrohydraulic forming process. In order to investigate the formability improvement in this hybrid process, first the electrohydraulic forming of aluminum alloy AA5182-O at room temperature is simulated using the commercial software LS-DYNA and the results of simulation are verified with the experimental results available in the literature. After verification, the warm electrohydraulic forming process in different temperatures is simulated and the Forming Limit Diagrams (FLD) are obtained and compared to each other. The results indicate that considerable improvement in formability of the aluminum alloys in warm electrohydraulic forming process in different forming paths. Due to the ability of the WEHF in formability improvement, a novel WEHF is introduced and its formability improvement is investigated. In the experimental tests 23.6% increasing in failure strain of aluminum alloy is observed at WEHF in comparison with EHF.  Therefore the formability improvement in WEHF process can be concluded.  }, keywords = {Warm Electrohydraulic Forming,Formability,Temperature,Finite Element Simulation}, title_fa = {مطالعه‌ بهبود شکل‌پذیری آلیاژ آلومینیوم AA5182-O در فرآیند شکل‌دهی الکتروهیدرولیک گرم، با استفاده از شبیه‌سازی اجزا محدود}, abstract_fa = {در این مقاله فرایند شکل‌دهی الکتروهیدرولیک گرم (WEHF) به­عنوان یک فرایند جدید شکل‌دهی برای بهبود شکل‌پذیری ورق‌های فلزی ارائه شده است. در این روش ورق قبل از شکل‌دهی، گرم شده و سپس با استفاده از فرایند شکل‌دهی الکتروهیدرولیک، شکل داده می­شود. برای بررسی بهبود شکل‌پذیری در روش ترکیبی بیان­شده، ابتدا فرایند شکل‌دهی الکترولیک ورق آلومینیم AA5182-O در دمای محیط مدل­سازی شده است و با مقایسه با نتایج تجربی موجود در مقالات، صحه‌گذاری شده است. سپس عملیات شکل‌دهی الکتروهیدرولیک گرم در دماهای مختلف مدل­سازی شده و منحنی‌های حد‌ شکل‌پذیری که در دماهای مختلف به­دست­آمده با هم مقایسه شده است. نتایج نشان­دهنده بهبود قابل توجه شکل‌پذیری در مسیرهای مختلف بارگذاری در فرایند شکل‌دهی الکتروهیدرولیک گرم می‌باشد. با توجه به قابلیت روش شکل‌دهی الکتروهیدرولیک گرم، یک روش تجربی جدید برای این فرایند ارائه­شده و بهبود شکل‌پذیری آن به­صورت تجربی بررسی شده است. در آزمایش‌های تجربی فرایند شکل‌دهی الکتروهیدرولیک گرم، بهبود 6/23 درصدی کرنش پارگی ورق آلومینیومی در مقایسه با شکل‌دهی الکتروهیدرولیک معمولی مشاهده گردید. بنابراین، نتایج تجربی نیز بهبود شکل‌پذیری در فرایند شکل‌دهی الکتروهیدرولیک گرم را نشان می‌دهد.}, keywords_fa = {شکل‌دهی الکتروهیدرولیک گرم,شکل‌پذیری,دما,شبیه‌سازی المان محدود}, url = {https://maj.ihu.ac.ir/article_202611.html}, eprint = {https://maj.ihu.ac.ir/article_202611_a1a17eb09968c96514c8b080824c0eb2.pdf} }