Ambrogio, G., Filice, L., Palumbo, G. and Pinto, S. “Prediction of Formability Extension in Deep Drawing when Superimposing a Thermal Gradient”, J. Materials Processing Technology, Vol. 162, pp. 454-460, 2005.
Thiruvarudchelvan, S. and Travis, F. “Hydraulic-Pressure-enhanced Cup-drawing Processes an Appraisal”, J. Materials Processing Technology, Vol. 140, No. 1, pp. 70-75, 2003.
Owsia, M.B., Hosseinipour, S.J., Bakhshi, M. and Gorji, A. “The Experimental and Simulation Investigation of Process and Geometrical Parameters for Hydroforming of Pin-type Metallic Bipolar Plates”, Modares Mechanical Engineering, Vol. 15, No. 8, pp. 215-226, 2015. (in Persian ).
Mohammadtabar, N., Bakhshi. M., Hosseinipour, S.J. and Gorji, A. “Study of Effective Parameters Inhydroforming of Fuel Cell Metallic Bipolar Plates with Parallel Serpentine Flow Field”, Modares Mechanical Engineering, Vol. 14, No. 8, pp. 17-27, 2014. (in Persian)
Kawka, M. “Simulation of Wrinkling in Sheet Metal Forming”, J. Materials Processing Technology, Vol. 109, No. 3, pp. 283-289, 2001.
Zhang, S.H. “Developments in Hydroforming”, J. Materials Processing Technology, Vol. 91, pp. 236-244, 1999.
Lang, L., Danckert, J. and Nielsen, K.B. “Investigation into Hydrodynamic Deep Drawing Assisted by Radial Pressure Part I. Experimental Observations of the Forming Processof Aluminum Alloy”, J. Materials Processing Technology, Vol. 148, pp. 119-131, 2004.
Toros, S., Ozturk, F. and Kacar, I. “Review of Warm Forming of Aluminum–Magnesium Alloys”, J. Materials Processing Technology, Vol. 207, No. 1, pp. 1-12, 2008.
Groche, P., Huber, R., Doerr, J. and Schmoeckel, D. “Hydromechanical Deep-drawing of Aluminium-alloys at Elevated Temperatures”, CIRP Annals- Manufacturing Technology, Vol. 51, pp. 215-218, 2002.
Chang, Q.F., Li, D.Y., Peng, Y.H. and Zeng, X.Q. “Experimental and Numerical Study of Warm Deep Drawing of AZ31 Magnesium Alloy Sheet”, Int. J. Machine Tools and Manufacture, Vol. 47, No. 3, pp. 436-443, 2007.
Wang, H., Luo, Y.B., Friedman, P., Chen, M.H. and Gao, L. “Warm Forming Behavior of High Strength Aluminum Alloy AA7075”, Transactions of Nonferrous Metals Society of China, Vol. 22, No. 1, pp. 1-7, 2012.
Chen, P. “Parametric Analysis of Warm Forming of Aluminum Blanks with FEA and DOE”, Transactions of Nonferrous Metals Society of China, Vol. 16, No. 2, pp. 267-273, 2006.
Kurz, G. “Heated Hydro-mechanical Deep Drawing of Magnesium Sheet Metal”, Magnesium Technology Symp, TMS Annual Meeting, pp. 67-71, 2004.
Choi, H., Koc, M. and Ni, J. “A Study on Warm Hydroforming of Al and Mg Sheet Materials: Mechanism and Proper Temperature Conditions”, J. Manufacturing Technology, Vol. 130, No. 4, pp. 410071-4100714, 2008.
Mahabunphachai, S. and Koc, M. “Investigations on Forming of Aluminium 5052 and 6061 Sheet Alloys at Warm Temperatures”, J. material and design, Vol. 31, pp. 2422-2434, 2010.
Takuda, H. “Finite Element Simulation of Warm Deep Drawing of Aluminium Alloy Sheet When Accounting for Heat Conduction”, J. Materials Processing Technology, Vol, 120, No. 1, p. 412, 2002.
Yadav, A. “Process Analysis and Design in Stamping and Sheethydroforming”, PhD Thesis, University of Ohio, Ohio, Columbus, 2008.
Kim, H.S., Koc, M., Ni, J. and Ghosh, A. “FE Modeling and Analysis of Warm Forming of Aluminum Alloys-validation Throughcomparison with Experiments and Determination of a Failure Criterion”, ASME J. Manufacturing Science and Engineering, Vol, 128, No. 3, pp. 613-621, 2006.
)
