[1] Sakaridis E, Karathanasopoulos N, Mohr D. Machine-learning based prediction of crash response of tubular structures. International Journal of Impact Engineering. 2022;166:104240. DOI 10.1016/j.ijimpeng.2022.104240##.
[2] Mostofi TM, Babaei H, Alitavoli M. Theoretical analysis on the effect of uniform and localized impulsive loading on the dynamic plastic behaviour of fully clamped thin quadrangular plates. Thin-Walled Structures. 2016;109:367-76. DOI 10.1016/j.tws.2016.10.009##.
[3] Mirzababaie Mostofi T, Sayah Badkhor M, Babaei H. A study on plastic response of circular plates under uniformly and locally distributed dynamic loading. Journal of Solid and Fluid Mechanics. 2020;10(2):11-27. DOI 10.22044/JSFM.2020.9264.3091##.
[4] Babaei H, Mostofi TM, Alitavoli M, Darvizeh A. Empirical modelling for prediction of large deformation of clamped circular plates in gas detonation forming process. Experimental Techniques. 2016;40(6):1485-94. DOI 10.1007/s40799-016-0063-3##.
[5] Mostofi TM, Babaei H, Alitavoli M. The influence of gas mixture detonation loads on large plastic deformation of thin quadrangular plates: Experimental investigation and empirical modelling. Thin-Walled Structures. 2017;118:1-11. DOI 10.1016/j.tws.2017.04.031##.
[6] Mostofi TM, Babaei H, Alitavoli M, Lu G, Ruan D. Large transverse deformation of double-layered rectangular plates subjected to gas mixture detonation load. International Journal of Impact Engineering. 2019;125:93-106. DOI 10.1016/j.ijimpeng.2018.11.005##.
[7] Nurick G, Martin J. Deformation of thin plates subjected to impulsive loading—a review: Part i: Theoretical considerations. International Journal of Impact Engineering. 1989;8(2):159-70. DOI 10.1016/0734-743X(89)90015-8##.
[8] Yuen SCK, Nurick G, Langdon G, Iyer Y. Deformation of thin plates subjected to impulsive load: Part III–an update 25 years on. International Journal of Impact Engineering. 2017;107:108-17. DOI 10.1016/j.ijimpeng.2016.06.010##.
[9] Mirzababaie Mostofi T, Sayah Badkhor M, Ghasemi E. Experimental investigation and optimal analysis of the high-velocity forming process of bilayer plates. Journal of Solid and Fluid Mechanics. 2019;9(3):65-80. DOI 10.22044/JSFM.2019.8586.2953##.
[10] Haghgoo M, Babaei H, Mostofi TM. 3D numerical investigation of the detonation wave propagation influence on the triangular plate deformation using finite rate chemistry model of LS-DYNA CESE method. International Journal of Impact Engineering. 2022;161:104108. DOI 10.1016/j.ijimpeng.2021.104108##.
[11] Nasiri S, Sadegh-Yazdi M, Mousavi S, Ziya-Shamami M, Mostofi T. Repeated underwater explosive forming: Experimental investigation and numerical modeling based on coupled Eulerian–Lagrangian approach. Thin-Walled Structures. 2022;172:108860. DOI 10.1016/j.tws.2021.108860##.
[12] Babaei H, Mirzababaie Mostofi T. Modeling and prediction of fatigue life in composite materials by using singular value decomposition method. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2020;234(2):246-54. DOI 10.1177/1464420716660875##.
[13] Nurick GN, Martin JB. Deformation of thin plates subjected to impulsive loading—a review Part II: Experimental studies. International Journal of Impact Engineering. 1989;8(2):171-86. DOI 10.1016/0734-743X(89)90015-8##.
[14] Jacob N, Nurick G, Langdon G. The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads. Engineering Structures. 2007;29(10):2723-36. DOI 10.1016/j.engstruct.2007.01.021##.
[15] Nurick G, Martin J. Deformation of thin plates subjected to impulsive loading—a review part II: experimental studies. International journal of impact engineering. 1989;8(2):171-86. DOI 10.1016/0734-743X(89)90015-8##.
[16] Goodfellow I, Bengio Y, Courville A. Deep learning: MIT press; 2016.
[17] Bishop CM, Nasrabadi NM. Pattern recognition and machine learning: Springer; 2006##.
[18] Bengio Y. Practical recommendations for gradient-based training of deep architectures. InNeural networks: Tricks of the trade: Second edition 2012 May (pp. 437-478). Berlin, Heidelberg: Springer Berlin Heidelberg. DOI 10.1007/978-3-642-35289-8_26##.
[19] Zhang A, Lipton ZC, Li M, Smola AJ. Dive into deep learning: Cambridge University Press; 2023. DOI 10.48550/arXiv.2106.11342##.
[20] Florence A. Circular plate under a uniformly distributed impulse. International Journal of Solids and Structures. 1966;2(1):37-47. DOI 10.1016/0020-7683(66)90005-9##.
[21] Wierzbicki T, Florence A. A theoretical and experimental investigation of impulsively loaded clamped circular viscoplastic plates. International Journal of solids and structures. 1970;6(5):553-68. DOI 10.1016/0020-7683(70)90030-2##.
[22] Bodner SR, Symonds PS. Experiments on viscoplastic response of circular plates to impulsive loading. Journal of the Mechanics and Physics of Solids. 1979;27(2):91-113. DOI 10.1016/0022-5096(79)90013-9##.
[23] Teeling-Smith R, Nurick G. The deformation and tearing of thin circular plates subjected to impulsive loads. International Journal of Impact Engineering. 1991;11(1):77-91. DOI 10.1016/0734-743X(91)90032-B##.
[24] Nurick GN, Teeling-Smith RG. Predicting the onset of necking and hence rupture of thin plates loaded impulsively-an experimental view. InStructures Under Shock and Impact II: Proceedings of the Second International Conference, held in Portsmouth, UK, 16th–18th June, 1992 1992 (pp. 431-445). Thomas Telford Publishing##.
[25] Thomas B. The effect of boundary conditions on thin plates subjected to impulsive loads. Dynamic Plasticity and Structural Behaviours. 1995;85##.
[26] Nurick G, Gelman M, Marshall N. Tearing of blast loaded plates with clamped boundary conditions. International Journal of Impact Engineering. 1996;18(7-8):803-27. DOI 10.1016/S0734-743X(96)00026-7##.
[27] Nurick G, Lumpp D. Deflection and tearing of clamped stiffened circular plates subjected to uniform impulsive blast loads. WIT Transactions on The Built Environment. 1970;25. DOI 10.2495/SUSI960361##.
[28] Gharababaei H, Darvizeh A. Experimental and Analytical Investigation of Large Deformation of Thin Circular Plates Subjected to Localized and Uniform Impulsive Loading#. Mechanics Based Design of Structures and Machines. 2010;38(2):171-89. DOI 10.1080/15397730903554633##.
[29] Zamani J, Safari K, Ghamsari A, Zamiri A. Experimental analysis of clamped AA5010 and steel plates subjected to blast loading and underwater explosion. The Journal of Strain Analysis for Engineering Design. 2011;46(3):201-12. DOI 10.1177/0309324710396601##.
[30] Henchie TF, Yuen SCK, Nurick G, Ranwaha N, Balden V. The response of circular plates to repeated uniform blast loads: An experimental and numerical study. International Journal of Impact Engineering. 2014;74:36-45. DOI 10.1016/j.ijimpeng.2014.02.021##.
[31] Babaei H, Mostofi TM, Sadraei SH. Effect of gas detonation on response of circular plate-experimental and theoretical. Structural Engineering and Mechanics. 2015;56(4):535-48. DOI 10.12989/sem.2015.56.4.535##.
[32] Ziya-Shamami M, Babaei H, Mostofi TM, Khodarahmi H. Structural response of monolithic and multi-layered circular metallic plates under repeated uniformly distributed impulsive loading: An experimental study. Thin-Walled Structures. 2020;157:107024. DOI 10.1016/j.tws.2020.107024##.
[33] Souza ML, da Costa CA, de Oliveira Ramos G. A machine-learning based data-oriented pipeline for Prognosis and Health Management Systems. Computers in Industry. 2023;148:103903. DOI 10.1016/j.compind.2023.103903##.
[34] Ketkar N, Santana E. Deep learning with Python. Berkeley, CA: Apress; 2017. DOI 10.1007/978-1-4842-5364-9##.
[35] Kingma DP, Ba J. Adam: A method for stochastic optimization. arXiv preprint arXiv:1412.6980. 2014. DOI 10.48550/arXiv.1412.6980##.
[36] Abadi M, Agarwal A, Barham P, Brevdo E, Chen Z, Citro C, Corrado GS, Davis A, Dean J, Devin M, Ghemawat S. Tensorflow: Large-scale machine learning on heterogeneous distributed systems. arXiv preprint arXiv:1603.04467. 2016. DOI 10.48550/arXiv.1603.04467##.
[37] Jones N. A theoretical study of the dynamic plastic behavior of beams and plates with finite-deflections. International Journal of Solids and Structures. 1971;7(8):1007-29. DOI 10.1016/0020-7683(71)90078-3##.
[38] Soares CG. A mode solution for the finite deflections of a circular plate loaded impulsively. Engineering Transactions. 1981;29(1):99-114##.
[39] Mostofi TM, Babaei H, Alitavoli M, Hosseinzadeh S. On dimensionless numbers for predicting large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile. Thin-Walled Structures. 2017;112:118-24. DOI 10.1016/j.tws.2016.12.014##.
[40] Duffey TA. Large deflection dynamic response of clamped circular plates subjected to explosive loading. Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); 1967##.
[41] Babaei H, Mirzababaie Mostofi T. New dimensionless numbers for deformation of circular mild steel plates with large strains as a result of localized and uniform impulsive loading. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2020;234(2):231-45. DOI 10.1177/1464420716654195##.
[42] Babaei H, Mirzababaie Mostofi T, Armoudli E. On dimensionless numbers for the dynamic plastic response of quadrangular mild steel plates subjected to localized and uniform impulsive loading. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2017;231(5):939-50.
DOI 10.1177/0954408916650713##.
[43] Cloete T, Nurick G. On the influence of radial displacements and bending strains on the large deflections of impulsively loaded circular plates. International Journal of Mechanical Sciences. 2014;82:140-8. DOI 10.1016/j.ijmecsci.2014.02.026##.
[44] Lippmann H. Kinetics of the axisymmetric rigid-plastic membrane subject to initial impact. International Journal of Mechanical Sciences. 1974;16(5):297-303. DOI 10.1016/0020-7403(74)90046-0##.
[45] C.K. De Wee, G.S. Langdon, G.N. Nurick. The influence of confined and unconfined explosions on the structural response of fully clamped mild steel plates. Undergraduate thesis, University of Cape Town, 2007##.
[46] Mirzababaie Mostofi T, Babaei H. Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part II: Analytical and empirical modelling. Journal of Solid and Fluid Mechanics. 2019;9(2):15-29. DOI 10.22044/JSFM.2019.7816.2778##.
[47] Babaei H, Darvizeh A. Analytical study of plastic deformation of clamped circular plates subjected to impulsive loading. Journal of Mechanics of Materials and Structures. 2012;7(4):309-22. DOI 10.2140/jomms.2012.7.309##.
[48] Gharababaei H, Darvizeh A, Darvizeh M. Analytical and experimental studies for deformation of circular plates subjected to blast loading. Journal of mechanical Science and Technology. 2010;24:1855-64. DOI 10.1007/s12206-010-0602-2##.